3. Unit Inspection of L.S.V 1) Loosen the L.S.V adjust nut (2 pcs.). And then lift the L.S.V up fully and tighten it up tentatively so that the L.S.V spring will not move. N5A0226E Legend 1. L.S.V spring shackle 2. Adjust nut 3. Lock nut N5A0228E 2) L.S.V adjustment When the adjustment cannot be done with the L.S.V spring shackle, loosen the L.S.V adjust nut (2 pcs.) and adjust the oil pressure to the standard value by sliding the L.S.V up and down. After the L.S.V adjustment, readjust the length of the L.S.V spring shackle. Legend 1. L.S.V adjust nut 2. L.S.V spring 3. L.S.V 2) Under the same conditions as 1) above, check the rear wheel cylinder fluid pressure. Tighten:
L.S.V adjust nut to 13 N m (1.3 kg m / 113 lb in) For (C) and (D), refer to the adjustment standard table. N5A0227E Legend 1. L.S.V adjust nut 2. L.S.V spring 3. L.S.V Standard Master cylinder fluid pressure kPa (kg/cm2/psi) Rear fluid pressure kPa (kg/cm2/psi) 2942 (30 / 427) (C) 7845 (80 / 1138) (D)