Isuzu — Isuzu N Series Training Manual

Step Action Value(s) YES NO 13 Replace sensor rotor. Is action complete? — Go to Step 18 — 14 Replace RR speed sensor. Is action complete? — Go to Step 18 — 15 Check the RR speed sensor circuit. Refer to Chart 12. Is action complete? — Verify repair — 16 Check for a poor connection and an open cir- cuit on the harness between EHCU and sen- sor connectors. Refer to “Note on Intermittents” described in earlier this section. Is action complete? — Go to Step 18 — 17 Replace EHCU. Is action complete? — Go to Step 18 — 18 1. Reconnect all components, ensure all components are properly mounted. 2. Clear diagnostic trouble code. Was this step finished? — Go to “Basic diag- nostic flow chart”. —