Semi Matching Wire harness side connector should be inserted to equipment side, then lever folds up about 30 ° . N5A1045E Notice: Check the lever lock is fixed to housing certainly. The le- ver or housing can be broken by turned to direction A without the lever folding up (30 ° ). N5A1043E Notice: Check the lever folding up. Condition of Matching On a vehicle in which the harness is clamped onto the EHCU bracket, loosen the before taking off the connec- tors. Matching Turn the lever to direction A and fix the lever lock to the housing. N5A1044E N5A1046E Finished Matching On a vehicle in which the harness is clamped onto the EHCU bracket, clamp the harness after matching the connectors.