RECOMMENDED THREAD LOCKING AGENT Notice: When the application procedures are specified in this manual, follow them. LOCTITE Application Steps 1. Completely remove all lubricant and moisture from the bolts and the female threaded surfaces of the parts to be joined. The surfaces must be perfectly dry. 2. Apply LOCTITE to the bolts. Apply LOCTITE to at least 1/3 of the bolt’s thread- ed area. N0A0015E 3. Tighten the bolts to the specified torque. Notice: After tightening, be sure to keep the bolts free from vi- bration and torque for at least an hour until LOCTITE hardens. TYPE COLOR LOCTITE 242 Blue LOCTITE 262 Red LOCTITE 271 Red