Isuzu — Manuel d'entretien Isuzu N Série (FR)

MAINTENANCE AND LUBRICATION MAINTENANCE SCHEDULE When performing the checks on the following items, regular inspection items should also be checked. Abbreviations I :Inspect, clean and correct or replace as necessary A : Adjust R : Replace or change T : Tighten to specified torque L : Lubricate [V] : Variation (optional on some models). [OPT] : Optional equipment. [SA] : For Smoother model only. *Marks: Under severe driving conditions, more frequent maintenance is required. Refer to “Maintenance schedule un- der severe driving conditions”. Maintenance Schedule: 4JH1-TC Engine Model (Engine Oil that Meets or Exceeds ACEA B3 Speci- fication) SERVICE INTERVAL:

(Use odometer reading or months Whichever comes first) × 1,000 km 20 40 60 80 100 120 × 1,000 mile 12 24 36 48 60 72 ENGINE *Engine oil R R R R R R Or every 9 months *Engine oil filter R R R R R R Or every 9 months Fuel filter R R R R R R Or every 18 months *Air cleaner element I I R I I R Or every 36 months Idling speed and acceleration — I — I — I Or every 18 months Valve clearances — — A — — A Or every 36 months Fuel tank cap and fuel pipes for loose connections or damage — — I — — I Or every 36 months Drive belt tension and damage I I I I I I Or every 9 months Radiator coolant — — R — — R Or every 36 months *Exhaust pipes and mountings for looseness or damage — I — I — I Or every 18 months Cooling system for water leak- age — I — I — I Or every 18 months Engine operation condition I I I I I I Or every 9 months CLUTCH Clutch fluid I I R I I R Or every 24 months Clutch pedal travel and free play I I I I I I Or every 6 months TRANSMISSION *Manual transmission oil I I R I I R Or every 24 months Gear control mechanism for looseness — — I — — I Or every 24 months Gear control cables — A — A — A Or every 12 months PROPELLER SHAFT *Universal joints and sliding sleeve grease L L L L L L Or every 12 months