DTC:C0235 (Flash Code 35) ASR Communication Line Fault/ASR Continuous Operation Check flow B-9 Step Action Value YES NO 1 1. Check the tire. 2. Check if specified tires are attached. 3. Check for abnormal wear on the tire outer surface. Are the tires normal? — Go to Step2 Replace with the specified tire, and Go to Step2 2 Check the speed sensor. (Check the sensor output by referring to the check flow C-1-1-C-1-4, or TC-1.) Is the sensor output normal? 100 — 140Ω Go to Step3 Repair the faulty speed sensor, and Go to Step5 3 Check the engine control. Is the engine control normal? “Diagnosis with Blinking Pattern” No.1 Go to Step4 Repair the engine control, and Go to Step5 4 Replace the EHCU.
Is this step completed? — Go to Step5 Go to Step4 5 1. Install all the components, and check that those are installed properly. 2. Clear the DTC. Is this step completed? — Go to “Diagnostic basic flow”. Go to Step5