Crankshaft Crankshaft Journal Bearing Selection Remarks: Crankshaft Bearing Housing Grade Mark Position The crankshaft bearing housing grade marks (1 or 2) are stamped collectively for all cylinders on the underside of the left front portion of the cylinder body. Crankshaft Journal Grade Mark Position The crankshaft journal grade marks (1 or 2) are stamped collectively for all cylinders on the front side of the crankshaft No. 1 balancer Crankshaft Bearing Grade Mark Position The identification color code (black, brown or blue) of the crankshaft journal bearing grade mark is applied on the side of each bearing. Crankshaft Journal No.
1, 2, 4 and 5 Item Service Standard Service Limit Crankshaft Journal and mm (in) Crankpin Uneven Wear 0.05 (0.002) Crankshaft Journal Wear mm (in) No. 1, 2, 4 and 5 81.905 — 81.925 (3.2246 — 3.2254) 81.85 (3.2224) No. 3 81.890 — 81.910 (3.2240 — 3.2248) 81.85 (3.2224) Crankshaft Journal and Bear- ing Clearance mm (in) No. 1, 2, 4 and 5 0.037 — 0.072 (0.0015 — 0.0028) 0.11 (0.0043) No. 3 0.051 — 0.086 (0.0020 — 0.0034) 0.11 (0.0043) Crankpin Wear 4HF1, 4HG1, 4HG1-T: 65.902 — 65.992 (2.5946 — 2.5954) 65.85 (2.5925) 4HE1-TC:
72.920 — 72.922 (2.8709 — 2.8433) 72.850 (2.8681) Crankshaft Journal Bearing mm (in) Spread 87 (3.43) Crankshaft End Play mm (in) 0.104 — 0.205 (0.0041 — 0.0081) 0.35 (0.014) Crankshaft Run-Out mm (in) 0.05 (0.002) or less 0.3 (0.012) Crankshaft Front and Rear Oil Seal and Slinger Wear When there is an oil leak found, the oil seal and slinger must be replaced as a set. Insert it securely with a spe- cial tool.
Bearing Housing Crankshaft Journal Crankshaft Bearing Color Code Grade Mark (Reference) Inside Diameter mm (in) Grade Mark (Reference) Outside Diameter mm (in) 1 87.000 — 87.009 (3.4252 — 3.4255) 1 81.905 — 81.915 (3.2246 — 3.2250) Black 2 81.916 — 81.925 (3.2250 — 3.2254) Brown 2 87.010 — 87.019 (3.4256 — 3.4259) 1 81.905 — 81.915 (3.2246 — 3.2250) Blue 2 81.916 — 81.925 (3.2250 — 3.2254) Black