Isuzu — Isuzu N Series Training Manual

Crankshaft Journal No. 3 Piston Piston Grade Selection Remarks: Piston Grade Mark Position The piston grade marks (i.e. A, B, C) are stamped on the piston upper face. Piston Outside Diameter Measuring Position Take measurement of the Piston at the position 82mm (3.23 in) from the top in the direction of the longer diameter.

Piston Grade Piston Pin Bearing Housing Crankshaft Journal Crankshaft Bearing Color Code Grade Mark (Reference) Inside Diameter mm (in) Grade Mark (Reference) Outside Diameter mm (in) 1 87.000 — 87.009 (3.4252 — 3.4255) 1 81.890 — 81.900 (3.2240 — 3.2244) Black 2 81.901 — 81.910 (3.2244 — 3.2248) Brown 2 87.010 — 87.019 (3.4256 — 3.4259) 1 81.890 — 81.900 (3.2240 — 3.2244) Blue 2 81.901 — 81.910 (3.2244 — 3.2248) Black Item Service Standard Service Limit Piston and Cylinder Liner mm (in) Clearance 4HG1: 0.081 — 0.116 (0.0032 — 0.0044) 4HF1: 0.081 — 0.113 (0.0032 — 0.0044) 4HE1-TC:

0.091 — 0.131 (0.0036 — 0.0052) Engine model Cylinder Liner Bore Diameter mm (in) Piston Service Grade Piston Outside Diameter mm (in) 4HF1 4HF1-2 112.041 — 112.060 (4.4111 — 4.4118) — 111.947 — 111.960 (4.4074 — 4.4079) 4HG1 4HG1-T 115.040 — 115.060 (4.5291 — 4.5299) — 114.944 — 114.959 (4.5253 — 4.5259) 4HE1-TC 110.066 — 110.075 (4.3333 — 4.3337) AX 109.944 — 109.959 (4.3285 — 4.3291) 110.076 — 110.085 (4.3337 — 4.3340) CX 109.960 — 109.975 (4.3291 — 4.3297) Item Service Standard Service Limit Piston Pin Wear mm (in) 4HF1 4HF1-2 4HG1 4HG1-T 35.995 — 36.000 (1.4171 — 1.4173) 35.970 (1.4161) 4HE1-TC 39.995 — 40.000 (1.5746 — 1.5748) 39.970 (1.5736)