ENGINE MECHANICAL CYLINDER HEAD Component N6A0098E Legend 1. Glow plug connector 6. Camshaft bearing cap 2. Glow plug 7. Camshaft bearing upper 3. Injection nozzle holder assembly 8. Camshaft assembly 4. Rocker arm shaft assembly 9. Camshaft bearing lower 5. Valve cap 10. Cylinder head Notice: During disassembly, be sure that the valve train components are kept together and identified so that they can be re-installed in their original loca- tions. Before removing the cylinder head from the engine and before disassembling the valve mechanism, make a compression test and note the results.
1) Loosen the rocker arm shaft bracket nuts and bolts in numerical order a little at a time and re- move the rocker arm shaft assembly with the camshaft brackets. 2) Leave the (A) indicated bolt unremoved on this occasion, since it is the rocker arm fixing bolt. Caution: Failure to loosen the rocker arm shaft bracket nuts and bolts in numerical order a little at a time will adversely af- fect the rocker arm shaft. Disassembly 1. Glow Plug Connector 2. Glow Plug 3. Injection Nozzle Holder Assembly Mark the nozzle holder assemblies fitting positions by tagging each nozzle holder assembly with the cylinder number from which it was removed. 4. Rocker Arm Shaft Assembly