Isuzu — Isuzu N Series Training Manual

7. Cotter Pin 8. Spring Seat 9. Oil Relief Valve Spring 10. Oil Relief Valve 11. Pump Cover N6A0170E Gear and Cover Clearance Use a feeler gauge to measure the clearance between the cover and the gear. If the clearance between the gear and the cover ex- ceeds the specified limit, the oil pump assembly must be replaced. N6A0169E Inspection and Repair Make the necessary adjustments, repairs, and part re- placements if excessive wear or damage is discovered during inspection. Gear Teeth and Cover Inner Wall Clearance Use a feeler gauge to measure the clearance between the gear teeth and the cover inner wall.

If the clearance between the gear teeth and the cover in- ner wall exceeds the specified limit, the oil pump assem- bly must be replaced. N6A0171E Driven Gear Shaft and Bushing Clearance 1. Use a micrometer to measure the gear shafts out- side diameter. Gear and Cover Clear- mm (in) ance Standard Limit 0.064 — 0.109 (0.0025 — 0.0043) 0.2 (0.008) Gear Teeth and Cover mm (in) Inner Wall Clearance Standard Limit 0.125 — 0.220 (0.0049 — 0.0087) 0.3 (0.012)