N6A0176E N6A0178E 3) Install the oil pump to the cylinder body. 4) Tighten the oil pump to the specified torque. 2) Align the crankshaft gear with the engagement mark of the idle gear and install the idle gear A. Tighten: Oil pump bolt to 31 N m (3.2 kg m / 23 lb ft) Tighten: Idle gear A bolt to 133 N m (13.6 kg m / 98 lb ft) N6A0177E N6A0179E 8. Idle Gear A 1) Turn the crankshaft clockwise so that the en- gagement mark of the crankshaft gear faces to the shaft center of the idle gear A and the No.1 cylinder piston comes to the top dead center. 9. Flywheel Housing 1) Carefully wipe any foreign material from the cyl- inder body rear face.
2) Apply the recommended liquid gasket (Three Bond 1207C) or its equivalent to the shaded ar- eas shown in the illustration.