N6A0184E N6A0448E 6. Power steering Pump Idle Gear Cover Install the gear cover with the O-ring. 14. Engine Control Lever Assembly Tighten: Gear cover bolt to 19 N m (1.9 kg m/14 lb ft) Tighten: Engine control lever bolt to 24 N m (2.4 kg m/17 lb ft) 15. Engine Control Wire N6A0185E 7. Oil Pan 8. Spacer Rubber Above works refer to “OIL PAN” section in this manual. 9. Crankshaft Rear Slinger 10. Crankshaft Rear Oil Seal 11. Flywheel Above works refer to “CRANKSHAFT REAR OIL SEAL” section in this manual. 12. Injection Pump Assembly Above works refer to “INJECTION PUMP ASSEM- BLY” section in this manual. 13. Oil Pipe 16. Driven Plate Use the clutch pilot aligner to install the driven plate.
Clutch Pilot Aligner: 5-8840-2240-0 N6A0449E Tighten: Oil pipe joint bolt to 17 N m (1.7 kg m/12 lb ft)