Isuzu — Isuzu N Series Training Manual

19. Cylinder Head Assembly Above works refer to “CYLINDER HEAD GASKET” section in this manual. 20. Camshaft Bearing Lower 21. Camshaft Assembly 22. Camshaft Bearing Upper 23. Camshaft Bearing Cap 24. Valve Cap 25. Rocker Arm Shaft Assembly Above works refer to “CAMSHAFT ASSEMBLY” section in this manual. 26. Head Cover Gasket 27. Cylinder Head Cover Above works refer to “CYLINDER HEAD COVER” section in this manual. 28. Nozzle Cover 29. Engine Assembly Above works refer to “ENGINE ASSEMBLY” sec- tion in this manual. Legend 1. Clutch pilot aligner 2. Clutch pressure plate assembly 3. Driven plate N6A0351E 17.

Clutch Pressure Plate Assembly 1) Align the clutch pressure plate with the flywheel knock pin. 2) Tighten the pressure plate bolts to the specified torque in numerical order. Tighten: Clutch pressure plate bolt to 40 N m (4.1 kg m/30 lb ft) N6A0352E Legend A. Knock pin 18. Cylinder Head Gasket Above works refer to “CYLINDER HEAD GASKET” section in this manual.