Isuzu — Isuzu N Series Training Manual

Tighten: Bolt to (1): 40 N m (4.1 kg m/30 lb ft) (2): 24 N m (2.4 kg m/17 lb ft) (3): 46 N m (4.7 kg m/34 lb ft) N6A0631E 34. Generator Notice: When tightening the generator, tighten in advance the fan belt temporarily after its adjustment. Insert through the lower fixing bolt from the rear side as shown in the illustration, and tighten it with a nut on the front side. 35. Fan Belt Check the drive belt tension. Depress the drive belt mid-portion with a 98 N (10 kg/22 lb) force. N6A0038E 36. Vacuum Pump Rubber Hose (12) 37. Vacuum Pump Oil Pipe (11) Tighten: Vacuum pump oil pipe to Cylinder body side: 41 N m (4.2 kg m/30 lb ft) Generator side:

23 N m (2.3 kg m/17 lb ft) Drive Belt Deflection mm (in) 8 — 12 (0.31 — 0.47) ... New belt 10 — 14 (0.39 — 0.55) ... Reuse belt Check the drive belt for cranking and other dam- age. N6A0286E Tighten: Oil filter bolt to 48 N m (4.9 kg m/35 lb ft) 38. Oil Filter Assembly N6A0037E Fan Belt Adjustment Fan belt tension is adjusted by moving the generator.