Tighten: Generator bracket bolt to 48 N m (4.9 kg m/35 lb ft) N6A6504E Legend 1. Washer 2. Pilot bearing N6A0293E 31. Fan Belt Adjust Plate Install the adjust plate and temporarily tighten the adjust plate bolt. 4) Remove the crankshaft stopper. 27. Crankshaft Front Slinger 28. Crankshaft Front Oil Seal Above works refer to “CRANKSHAFT FRONT OIL SEAL” section in this manual. 29. Crankshaft Damper Pulley 1) Apply a coat of engine oil to the threads of the bolts. 2) Align the damper pulley with the crankshaft knock pin and tighten the bolts to the specified torque in numerical order. Tighten: Damper pulley bolt to 200 N m (20.4 kg m/147 lb ft) N6A0292E 32.
Injection Pump Assembly Above works refer to “INJECTION PUMP ASSEM- BLY” section 6C in this manual. 33. Engine Foot Tighten: Engine foot bolt to 51 N m (5.2 kg m/38 lb ft) N6A0607E 30. Generator Bracket