N6A0631E N6A0037E 43. Generator Fan Belt Adjustment Fan belt tension is adjusted by moving the genera- tor. Notice: When tightening the generator, tighten in advance the fan belt temporarily after its adjustment. Tighten: Bolt to (1): 40 N m (4.1 kg m/30 lb ft) (2): 24 N m (2.4 kg m/17 lb ft) (3): 46 N m (4.7 kg m/34 lb ft) Insert through the lower fixing bolt from the rear side as shown in the illustration, and tighten it with a nut on the front side. N6A0344E 44. Fan Belt Check the drive belt tension. Depress the drive belt mid-portion with a 98 N (10 kg/22 lb) force. N6A0038E 45. Vacuum Pump Rubber Hose (12) 46. Vacuum Pump Oil Pipe (11) Drive Belt Deflection mm (in) Tighten:
Vacuum pump oil pipe to Cylinder body side: 41 N m (4.2 kg m/30 lb ft) Generator side: 23 N m (2.3 kg m/17 lb ft) 8 — 12 (0.31 — 0.47) ... New belt 10 — 14 (0.39 — 0.55) ... Reuse belt Check the drive belt for cranking and other dam- age.