Engine Mounting Side N6A0765E Legend 1. Engine mount 2. Engine assembly Removal Preparation Disconnect battery ground cable Tilt the cab Remove the transmission panel Drain coolant Transmission Side 1. Propeller shaft Assembly 1) Put in advance an alignment mark to the drum and the flange yoke. 2) Put the drum and the flange yoke aside and hang them with a wire so that they do not inter- fere with servicing work. 2. Car Speed Sensor Connector 3. Neutral Switch Connector 4. Back-up Lamp Connector 5. Harness Connector Remove the connectors from the harness bracket. At that time, take care not to cause any damages to the clips. N6A0750E 6.
Parking Brake Cable Remove the clip and slide the cover provided in the middle of the cable. Then, loosen the longer nut on the front side of the vehicle to disconnect the park- ing brake cable.