Isuzu — Isuzu N Series Training Manual

N6A0766E N6A0768E 2. Engine Assembly 1) Make sure that the connecting pipes, hoses, and cables have all been removed from the en- gine. 2) Operate the hoist to slowly raise the engine un- til it is clear of the chassis frame. Installation Engine Mounting Side 1. Engine Assembly 1) Attach a lifting wire to the engine lifting hang- ers. 2) Operate the hoist to position the engine above the chassis frame. 3) Carefully lower the engine until it is just above the chassis frame. N6A0767E 3) Rotate the engine 90 degrees. 4) Continue to lift the engine from the chassis. 5) Carefully move the hoist and engine. 6) Set the engine on an engine stand.

N6A0768E 4) Rotate the engine 90 ° to position it for final in- stallation. 5) Carefully set the engine to the chassis. The front of the engine should be held higher than the rear at this time. Be careful not to damage the exposed parts.