7. Intake Air Duct Transmission Side 1. Transmission Assembly Fasten the transmission to the transmission jack with a chain in the same manner as when dis- mounting it, and tighten the clutch housing clamp- ing bolt to the specified torque. (Refer to the illustration below.) N6A0784E N6A0787E 2. Transmission Mounting Nut 2) Install the clutch return spring to the clutch shift fork. 6. Select Cable 7. Shift Cable 8. Parking Brake Cable 1) With the lock nut (1) of the parking brake side cable tightened to the limit, rotate the nut (2) to connect it with the front side cable. 2) After tightening the front side nut (2) to the limit, fasten the parking brake cable with the lock nut (1). Tighten:
Transmission mounting nut to 40 N m (4.1 kg m/30 lb ft) 3. Starter 4. Starter Earth Cable Refer to the preceding page. 5. Clutch Slave Cylinder 1) Install the clutch slave cylinder. Tighten: Slave cylinder bolts to 16 N m (1.6 kg m/12 lb ft)