N6A0786E 3) Pull the parking brake lever to the limit (with the operating force of about 147 N (15 kg/33 lb) at the hand), adjust the lever with the lever adjust- ing nut so that the number of notches becomes 6 to 8 notches. 9. Harness Connector 10. Back-up Lamp Connector 11. Neutral Switch Connector 12. Car Speed Sensor Connector 13. Propeller Shaft Assembly Tighten: Propeller shaft bolt to 103 N m (10.5 kg m/76 lb ft) Engine Warm-Up After completing the required maintenance procedures, start the engine and allow it to warm up. Then check the following: 1) Engine idling speed Refer to “Servicing” for the idling speed adjust- ment procedure.
2) Engine noise level 3) Engine oil, coolant and fuel leakage 4) Engine control cable operation 5) Clutch engagement 6) Indicator warning light operation