Isuzu — Isuzu N Series Training Manual

ENGINE COOLING GENERAL DESCRIPTION N6A0789E Legend 1. Reservoir tank 8. Air bleeding 2. Radiator cap 9. Water outlet pipe 3. Bypass hose 10. Thermostat 4. Radiator 11. Thermometer unit 5. Drain cock 12. Water jacket 6. Cooling fan 13. Oil cooler 7. Water pump The engine cooling system consists of the radiator, the water pump, the cooling fan, and the thermostats. To quickly increase cold engine coolant temperature for smooth engine operation, the coolant is circulated by the water pump and thermostats through the by-pass hose and back to the cylinder body. The coolant does not cir- culate through the radiator.

When the coolant temperature reaches 82 ° C (180 ° F), the thermostat will begin to open and a gradually in- creasing amount of coolant will circulate through the ra- diator. The thermostats will be fully open when the coolant tem- perature reaches 100 ° C (212 ° F). All of the coolant is now circulating through the radiator for effective engine cooling. Engine coolant change procedure. 1. To change engine coolant, make sure that the en- gine is cool. WHEN THE COOLANT IS HEATED TO A HIGH TEM- PERATURE, BE SURE NOT TO LOOSEN OR RE- MOVE THE RADIATOR CAP. OTHERWISE YOU MIGHT GET SCALDED BY HOT VAPOR OR BOILING WATER.

TO OPEN THE RADIATOR CAP, PUT A PIECE OF THICK CLOTH ON THE CAP AND LOOS- EN THE CAP SLOWLY TO REDUCE THE PRESSURE WHEN THE COOLANT HAS BECOME COOLER. 2. Open radiator cap and drain the cooling system by loosening the drain valve on the radiator and on the cylinder body. Notice: For best result it is suggested that the engine cooling system be flushed at least once a year. WWaArRnNinINg:G: