Isuzu — Isuzu N Series Training Manual

An improperly positioned clip will result in injection pipe breakage and fuel pulsing noise. Tighten: Clip screw to 3 N m (0.3 kg m / 26 lb in) 3) Tighten the injection pipe sleeve nuts to the specified torque. Tighten: Injection pipe sleeve nut to 29 N m (3 kg m / 22 lb ft) 4. PCV Hose 5. Fuel Filter Tighten: Fuel filter bracket bolt to 34 N m (3.5 kg m / 25 lb ft) 6. Fuel Pipe 7. Leak Off Pipe 8. Nozzle Cover 9. Fuel Feed Hose 10. Fuel Return Hose 11. Oil Pipe 12. Engine Control Lever 13. Engine Control Wire 14. Accelerator Control Cable 15. Engine Stop Cable 16. Oil Level Guide Tube 17. Vacuum Hose 18. Intake Air Duct N6A0055E 3.

Fuel Injection Pipe 1) Install the injection pipe assembly and tempo- rarily tighten the injection pipe sleeve nuts. 2) Set the clips in the prescribed position shown in the illustration. N6A1654E Legend A. 4HG1-T Caution: Make absolutely sure that the clip is correctly positioned.