Isuzu — Isuzu N Series Training Manual

FUEL TANK Component N6A0971E Legend 1. Evapo fuel hose 5. Band 2. Fuel feed hose 6. Fuel tank 3. Fuel return hose 7. Frame 4. Fuel gauge unit connector Removal Remove the fuel gauge unit connector. 5. Band Preparation Disconnect the battery ground cable. Remove the nut of the fuel tank fixing band, and then remove the band end on the frame side. 6. Fuel Tank Loosen the fuel filler cap. Drain fuel from drain plug. After the drain fuel, tighten the drain plug to the specified torque. Pull out the fuel tank to the outside. Notice: When it is not possible to pull out the fuel tank, remove the bracket and then draw out the fuel tank downward. Tighten: Drain plug to 29 N m (3 kg m / 22 lb ft) 1.

Evapo Fuel Hose 2. Fuel Feed Hose 3. Fuel Return Hose Installation 1. Fuel Tank Plugging the return hose to prevent fuel from getting spilt, tie it to the fame with the plugged end up. 4. Fuel Gauge Unit Connector Notice: When the bracket was removed to take off the fuel tank, install the bracket to the frame and tighten it to the spec- ified torque.