Isuzu — Isuzu N Series Training Manual

STARTING SYSTEM GENERAL DESCRIPTION Component Starting Circuit The cranking system consists of a battery, starter, starter switch, starter relay, etc. and these main components are connected as shown in figure. For details of the starting circuit. N6A1660E Legend 1. Ring gear 6. “B” terminal 2. Pinion clutch 7. Starter 3. Shift lever 8. Relay; starter 4. Magnetic switch 9. Starter switch 5. “S” terminal 10. Battery Starter The starting system employs a magnetic type reduction starter in which the motor shaft is also used as a pinion shaft. When the starter switch is turned on, the contacts of magnetic switch are closed, and the armature rotates.

At the same time, the plunger is attracted, and the pinion is pushed forward by the shift lever to mesh with ring gear. Then, the ring gear runs to start the engine. When the engine starts and the starter switch is turned off, the plunger returns, the pinion is disengaged from ring gear, and the armature stops rotation. When the engine speed is higher than the pinion, the pinion idles, so that the ar- mature is not driven.