N6A1258E Legend 1. Vacuum port Working Check Apply powervoltage between the terminals, there is no problem if the negative pressure does not rise when applied to the input port. 3. Exhaust Gas Recirculation (EGR) Valve (Equipped with EGR and Variable Swirl System (VSS)) With negative pressure applied to the diaphragm chamber, make sure that the valve is smoothly ac- tuated to make the area between (1) and (2) venti- lated. Startup: About -13.3 ± 2.7 kPa (-100 ± 20 mmHg / -1.93 ± 0.39 psi) N6A1259E Check to see if EGR valve is normally actuated un- der the following conditions: QWS off (After warming up) Engine coolant temp.: 80 ° C (176 ° F) or higher