Komatsu — 4.4.5 Parts inspection and measurement

4. Disassembly, Inspection and Reassembly of Engines (5) Connecting rod (a) Appearance inspection Inspect the portion near the boundary of the chamfered portion and I-beam section of the big and small ends of the connecting rod as well as the portion near the oil hole of the bushing at the small end for cracks, deformation, and discoloration. (b) Twist and parallelism measurement Use a connecting rod aligner and measure the twist and bend. mm (c) Rod small end measurement Measure the pin outside diameter according to 4.4.5.(4)(a) described above. mm If the bushing is to be replaced because the oil clearance exceeds the limit, use spare part.

104 Item Standard dimension Limit dimension Twist and parallelism 0.03 or less per 100mm 0.08 Model Item Standard Limit 3TNV82A Piston pin I.D. bushing 23.025 23.038 23.068 Pin O.D. 22.995 23.000 22.967 Clearance 0.025 0.043 0.101 TNV84 88 Piston pin I.D. bushing 26.025 26.038 26.068 Pin O.D. 25.995 26.000 25.967 Clearance 0.025 0.043 0.101 4TNV94L 98 Piston pin I.D. bushing 30.025 30.038 30.068 Pin O.D. 29.987 30.000 29.959 Clearance 0.025 0.051 0.109 4TNV106(T) Piston pin I.D. bushing 37.025 37.038 37.068 Pin O.D. 36.989 37.000 36.961 Clearance 0.025 0.049 0.107 Model Service part code 3TNV82A 119810-23910 TNV84 88 129100-23910 4TNV94L 98(T) 129900-23910 4TNV106(T) 123900-23910