12. Service Standards 12. SERVICE STANDARDS 12.1 Engine Tuning 185 No.
Inspection item Standard Limit Reference page 1 Gap at intake/exhaust valve heads mm TNV82A 98 0.15 0.25 - 2.2.6(4) 4TNV106(T) 0.25 0.35 - 2 V-belt tension mm at 98N (10kgf) Between alternator and crank pulley Used part 10 14 - 2.2.2.(2) New part 8 12 - Between alternator and radiator fan Used part 7 10 New part 5 8 Between radiator fan and crank pulley Used part 9 13 New part 7 11 3 Fuel injection pressure MPa (kgf/cm2) 3TNV82A TNV88(VM) 4TNV94L 106(T) 21.57 22.55 (220 230) - 2.2.6.(3) 3TNV82A TNV88(CL) 19.6 20.6 (200 210) 4 Compression pressure (at 250 min-1) MPa (kgf/cm2) TNV82A 3.16(31) 0.1(1) 2.45(25) 0.1(1) 3.3 TNV84 3.24(33) 0.1(1) 2.55(26) 0.1(1) 3/4TNV84T 2.94(30) 0.1(1) 2.45(25) 0.1(1) TNV88-106 3.43(35) 0.1(1) 2.75(28) 0.1(1) 5 Coolant water Capacity (Only engine body) (Liter) 3TNV82A,84 1.8 - 2.2.1.(4) 3TNV84T,88 2.0 - 4TNV84(T),88 2.7 - 4TNV94L 98(T) 4.2 - 4TNV106(T) 6.0 - 6 Lubricating oil capacity (oil pan) (Liter) - Full Effective - 2.2.1.(3) 3TNV82A 5.5 1.9 - 3TNV84(T)/88 6.7 2.8 - 4TNV84(T)/88 7.4 3.4 - 4TNV94L/98(T) 10.5 4.5 - 4TNV106(T) (CL class) 14.0 9.0 - 4TNV106(T) (VM class) 14.0 7.5 - 7 Lubricating oil pressure MPa (kgf/cm2) - at rated speed at low idle speed - 3TNV82A 98 0.29(3.0) 0.39(4.0) 0.06(0.6) or above - 4TNV98T 4TNV106(T) (VM, WO balancer) 0.39(4.0) 0.49(5.0) 4TNV106(T) (CL, WO balancer) 0.31(3.2) 0.49(5.0) 4TNV106(T) (VM, W balancer) 0.34(3.5) 0.44(4.5) 8 Oil pressure switch operating pressure MPa (kgf/cm2) 0.05±0.01 (0.5±0.1) - - 9 Thermostat valve opening temperature deg.
C Full opening lift (mm) (temperature) 2.7 All models 69.5 72.5 8 or above (85 deg.C) All models option 80 84 10 or above (95 deg.C) 10 Thermo switch actuating temperature (deg.C) 107 113 - 2.4.2