Komatsu — 3.2 Quick Reference Table for Troubleshooting

3.

Troubleshooting Insufficient delivery capacity of trochoid pump Clogged lubricating oil filter Defective pressure regulating valve Cracked water jacket Leakage from lubricating oil piping system color Excessive fuel injection volume Starting failure Insufficient engine output Black Excessive cooling effect of radiator Too early timing of fuel injection pump Exhaust White Insufficient cooling effect of radiator Insufficient coolant water level Slackened fan belt Defective thermostat Ordinary Too late timing of fuel injection pump Uneven injection volume of fuel injection pump Poor spray pattern from fuel injection nozzle Engine starts but stops Much Improper properties of fuel oil Clogged strainer at feed pump inlet soon.

Exhaust smoke Little None Engine does not start.

Insufficient lubricating oil level Trouble symptom Insufficient fuel supply to fuel injection pump Improper properties of lubricating oil Water entrance in fuel system Air entrance in fuel system Clogged or cracked fuel pipe Clogged fuel filter Priming failure Cause Cooling Water System Lubricating System Fuel system Trouble symptom Cause Starting failure Insufficient engine output Poor exhaust color High knocking sound during combustion Abnormal engine sound Uneven combustion sound Hunting Large engine vibration Difficulty in returning to low speed Excessive fuel consumption Lubricating oil Much blow-by gas Cooling water Air intake Exhaust temperature rise Corrective action Engine does not start.

Engine starts but stops soon. Exhaust color During work During idling During work Excessive consumption Dilution by fuel oil Mixture with water Low L.O. pressure Overheat Low water temperature Pressure drop Pressure rise Exhaust smoke Ordinary White Black White Black None Little Much Cooling Water System Excessive cooling effect of radiator Defective thermostat (kept closed) (See 2.2.7 in Chapter2.) Insufficient cooling effect of radiator Defective thermostat (kept opened)(See 2.2.7 in Chapter2.) or slipping fan belt (See 2.2.2-2) in Chapter2.) Insufficient coolant water level Check water leakage from cooling water system. (See 2.2.1-4) in Chapter2.) Cracked water jacket Repair or replace.

Slackened fan belt Adjust the belt tension. (See 2.2.2-2) in Chapter2.) Defective thermostat Check or replace. (See 2.2.7 in Chapter2.) Lubricating System Improper properties of lubricating oil Use proper lubricating oil. (See 1.3.2 in Chapter1.) Leakage from lubricating oil piping system Repair. Insufficient delivery capacity of trochoid pump Check and repair. (See 5.5 in Chapter5.) Clogged lubricating oil filter Clean or replace. Defective pressure regulating valve Clean, adjust or replace. Insufficient lubricating oil level Add proper lubricating oil. (See 2.2.1-3) in Chapter2.) Fuel system Too early timing of fuel injection pump Check and adjust.

(See 2.2.7-4) in Chapter2.) Too late timing of fuel injection pump Check and adjust. (See 2.2.7-4) in Chapter2.) Improper properties of fuel oil Use proper fuel oil. (See 1.3.1 in Chapter1.) Water entrance in fuel system Perform draining from the fuel filter. (See 2.2.3 and 2.2.5 in Chapter2.) Clogged fuel filter Clean or replace. (See 2.2.5 in Chapter2.) Air entrance in fuel system Perform air bleeding. (See 2.2.3 in Chapter2.) Clogged or cracked fuel pipe Clean or replace. Insufficient fuel supply to fuel injection pump Check the fuel tank cock, fuel filter, fuel pipe, and fuel feed pump. Uneven injection volume of fuel injection pump Check and adjust.

Excessive fuel injection volume Check and adjust. Poor spray pattern from fuel injection nozzle Check and adjust. (See 2.2.6 in Chapter2.) Priming failure Foreign matter trapped in the valve inside the priming pump. (Disassemble and clean.) Clogged strainer at feed pump inlet Clean the strainer.