Komatsu — 4.2.5 Parts Inspection and measurement

4. Disassembly, Inspection and Reassembly of Engines 4.2.5 Parts Inspection and measurement (1) Cylinder head Clean the cylinder head, mainly the combustion surface, valve seats and intake/exhaust ports, remove carbon deposit and bonding agent, and check the surface state. (a) Appearance check Check mainly discoloration and crack. If crack is suspected, perform color check. (b) Combustion surface distortion Apply a strait-edge in two diagonal directions and on four sides of the cylinder head, and measure distortion with a thickness gage. mm (c) Valve sink Measure with the valve inserted to the cylinder head. mm (d) Seat contact Apply a thin coat of minium on the valve seat.

Insert the valve in the cylinder and push it against the seat to check seat contact. Standard: Continuous contact all around 76 Standard Limit Distortion 0.05 or less 0.15 Standard Limit 3TNV82A (2-valve head) Intake 0.35 0.55 0.8 Exhaust 0.30 0.50 0.8 4TNV84 3TNV84(T) 3/4TNV88 (2-valve head) Intake 0.30 0.50 0.8 Exhaust 0.30 0.50 0.8 4TNV84T 4TNV94/98(T) (4-valve head) Intake 0.36 0.56 0.8 Exhaust 0.35 0.55 0.8 4TNV106(T) (4-valve head) Intake 0.5 0.7 1.0 Exhaust 0.7 0.9 1.2