5 Control Heads BY2 Classic Introduction These controls provide both shift and throttle operation for inboards and inboard/outboards. The throttle is an electrical output signal and the shift is a typical marine mechanical control cable. We recommended the use of Teleflex TFXtreme™ control cables. Note: Trim harness is supplied with control heads that have a trim switch option. Other Parts Required for Installation Control Cable Connection kit part number 0221719, used to mount the shift cable is included. © 2011 Yanmar Marine International • Rev.
2.0 5:32 Yanmar Electronic Control Systems Technical Manual Control Features Side Mount Top Mount Single Lever Shift and Throttle Operation Yes Yes Neutral Throttle Warm-Up Yes Yes Neutral Throttle Interlock Yes N/A Neutral Safety Switch (to prevent starting in gear) No No Friction Adjust Screw (to prevent throttle “creep”) Yes Yes Control Options Trim & Tilt Switch Option Option Quantity Part 1 Control Cables Check Chart for routing and length. Teleflex TFXtreme™ Cables are recommended. 1 Engine Shift Connection Kit Specific to Engine Manufacturer