5 Control Heads BY2 Classic Side Mount Control Operation Neutral Interlock Button To prevent bumping the side mount control out of neutral, the button must be depressed and held to shift into forward or reverse. Stern Drive Trim Switch Used to the stern drive IN or OUT to level the boat while underway. Neutral Throttle Warm-up Button This feature provides a “Throttle Only” option to operate the engine throttle without going into gear. Operation: When the Control Lever is in Neutral, depress both the Neutral Interlock AND Neutral Throttle Warm-up buttons at the same time. * While holding the buttons, move the lever forward to throttle up the engine.
When the lever is returned to the Neutral position, the buttons will reset automatically. Once the buttons reset, the Control Lever will work both shift and throttle functions. * The depression of both buttons is only required on Side Mount Controls. Trailer Tilt Switch Used to raise the drive for trailering the boat. © 2011 Yanmar Marine International • Rev. 2.0 Yanmar Electronic Control Systems Technical Manual 5:33