Yanmar — Yanmar Electronic Control System Technical Manual for Classic, BY2, 6LY3, 6CX, and SY GEN III Series Engines

5 Control Heads BY2 Classic Friction Adjustment Screw Adjustment of this screw enables the friction in the throttle operating mechanism to be increased to prevent unwanted handle movement. To adjust, place the lever in the forward or reverse throttle position (just beyond the shift position). Remove the cover and adjust the friction adjustment screw. Turning the screw clockwise increases the friction. NOTICE Be very careful not to overtighten the friction screw as it could adversely effect lever operation.

Friction Adjustment 3/32” Allen Wrench Friction Adjustment 3/32” Allen Wrench Maintenance and Corrosion Protection For maximum protection, especially in a saltwater environment, the control head and lever should be washed lightly with fresh water on a regular basis. • Periodically check the control head mechanism for loose fasteners and signs of wear on moving parts. • Keep moving parts well lubricated with a moisture-displacing lubricant. • Periodically check the cables and engine connections for signs of wear and corrosion. Replace as necessary. © 2011 Yanmar Marine International • Rev. 2.0 5:40 Yanmar Electronic Control Systems Technical Manual