Yanmar — Yanmar Electronic Control System Technical Manual for Classic, BY2, 6LY3, 6CX, and SY GEN III Series Engines

Section 6 interface modules Before performing any operations within this section, review the “Safety Section” starting on page xviii. WARNING sudden movement hazard The engine interface module controls throttle, shifting and Neutral Start Protection. Incorrect or missing connections can cause the boat to respond in an unexpected manner. This section covers Control and Engine Interface Modules. Control Interface Modules can be used with a variety of control heads. They take information in analog form from the head and turn it into NMEA 2000 ® CAN Bus data for the engine. Most Control Interface Modules have a part number similar to the Control Head.

Engine Interface Modules collect data from the engine and a variety of inputs and allow NMEA 2000 ® CAN Bus communications of this information with both control and display units on the boat. Note: Engine Interface module i8130 and i8140 shipped with the BY engine. The i8150 ships with the BY2 engines and is a pin for pin replacement for i8130/i8140 which are now obsolete. © 2011 Yanmar Marine International • Rev. 2.0 Yanmar Electronic Control Systems Technical Manual 6:1