6 Interface Modules CH67600 Interface Module Part Numbers and Compatibility The Control Interface modules are used to connect numerous style control heads to the CAN Bus. While the hardware and software combinations may vary, the part number of the Control Interface module usually reflects the part number of the control. Because some controls are similar or identical it is possible to substitute certain Control Interfaces if needed. The table below shows which units may be interchanged. Any item on a line may be substituted for any other item on the same line: © 2011 Yanmar Marine International • Rev.
2.0 6:2 Yanmar Electronic Control Systems Technical Manual CH67600 CH67601 CH67044S (Single) CH67056S (Single) CH67044DS (Dual Slave) CH67056DS (Dual Slave) CH67044DM (Dual Master) CH67056DM (Dual Master) ch67505 (no alternative substitution)