11 by2 Series Engines - Yanmar zt350 Stern Drive Stern Drive Actuator(s) General Connections The 12 volt (3 pin) power connection of the Shift Actuator goes to the 50 or 80 amp (air heaters) Engine Breaker using cable CE10420. This power should be connected so it comes through the Battery Switch and has a proper fuse. See “Section 9 - Connectivity” for details. Fuse NMEA 2000 ® CAN Bus Connection 12 volt (3 pin) Power Connection CE10420: Actuator Power Cable Red (Positive 12 Volts) Black (Negative) White (not used) © 2011 Yanmar Marine International • Rev. 2.0 11:8 Yanmar Electronic Control Systems Technical Manual