section 12 cable information Before performing any operations within this section, review the “Safety Section” starting on page xviii. WARNING shock hazard A shock hazard may exist while tracing wires and checking voltages. Yanmar electronic control systems use a variety of cables to satisfy the requirements of many applications. BY2 Classic and BY2 Unlimited share some cables, while many other cables are shared between the 6LY3, 6CX and SY GEN III. Some cables are shared across all the engines. The table in the front of this section shows the various cable applications. The first two hundred (or so) 6LY3 engines used a CE415XX engine harness. Later engines use a CE425XX engine harness.
Both are covered in this manual. All cable numbers that end in XX come in a variety of lengths – XX represents the length of the cable in feet. Electrical Harnesses Photos of electrical harnesses are shown in individual installation manuals: © 2011 Yanmar Marine International • Rev. 2.0 Yanmar Electronic Control Systems Technical Manual 12:1 Engine Type Single Engine Dual Engine BY2 Classic MANINBY2CM01 BY2 Unlimited MANINBY2UM01 MANINBY2UM02 By Classic Obsolete BY Unlimited Obsolete Obsolete 6LY3/6CX MANINLYM01 MANINLYM02 SY GEN III MANINSY3M01 MANINSY3M02