Yanmar — Yanmar Electronic Control System Technical Manual for Classic, BY2, 6LY3, 6CX, and SY GEN III Series Engines

section 15 troubleshooting Before performing any operations within this section, review the “Safety Section” starting on page xviii. WARNING sudden movement hazard always stop the engine before beginning service. never leave the key in the key switch when servicing the engine. Someone may accidentally start the engine and not realize it is being serviced. never operate the engine while wearing a headset to listen to music or radio because it will be difficult to hear the warning signals. shock hazard ALWAYS turn off the battery switch (if equipped) or disconnect the negative battery cable before servicing the equipment.

Exercise caution, as electical shock may cause an involuntary “pull back” reaction resulting in additional injury. CAUTION tool hazard always use tools appropriate for the ask at hand and use the correct size tool for loosening or tightening engine or control system parts. © 2011 Yanmar Marine International • Rev. 2.0 Yanmar Electronic Control Systems Technical Manual 15:1