3 i5601E Digital Display Factory Settings ENGINE Group Right hand gauge selections are made from the button menu activated by the right arrow button. Note the arrow button will not appear if in the “Hot key LOCKED” mode of operation. Choices are listed at the right. Tach The ENG Tach selection displays a large full screen Tachometer. The “Status” window is displayed in the bottom right hand corner of the display and has three states. Blank – Sync not enabled. TROLL – which is a reverse video block (white text/black background) that indicates that the Trolling Mode is ON. SYNC – Has two display modes:
SYNC - Sync is enabled, normal video (black text) which indicates the Sync is on (same as Red Sync Light on Control Head) SYNC The field will reverse video (white text/black background) when Sync is active. For example, in Cruise Sync, it will indicate when levers are above 20% throttle and are within 10% of each other, resulting in active engine synchronization. The “Troll” and “Sync” functions are the same in the Eng Data 1 thru Eng Data 4 displays. The only difference is a single character is displayed where “T” is for “Troll” and a “S” for “Sync.” © 2011 Yanmar Marine International • Rev. 2.0 3:48 Yanmar Electronic Control Systems Technical Manual