32 SEBU8598 Engine Diagnostics Self-Diagnostics Engine Diagnostics i00863835 Self-Diagnostics SMCS Code: 1000; 1900; 1901; 1902 The electronic control module has some self- diagnostic ability. When an electronic problem with an input or an output is detected, a diagnostic code is generated. This indicates the specific problem with the circuitry. Diagnostic codes are also generated when an abnormal engine operating condition is detected. For example, a diagnostic code will be generated if the low oil pressure alarm is activated. In this case, the diagnostic code indicates the symptom of a problem. This type of diagnostic code is called an event.
An event is triggered by the detection of an abnormal engine operating condition. A diagnostic code which represents a problem that currently exists is called an active code. A diagnostic code that is stored in memory is called a logged code. Always service active codes prior to servicing logged codes. Logged codes may include the following categories: Intermittent problems Recorded events Performance history Logged codes may not indicate that a repair is needed. The problems may have been repaired since the logging of the code. Logged codes may be helpful to troubleshoot intermittent problems.