Caterpillar — Caterpillar C15 and C18 Engine Operation and Maintenance Manual

Refill Capacities Fluid Recommendations 46 SEBU8598 Refer to Special Publication, SEBU6251, “Cat Commercial Diesel Engine Fluids Recommendations” for additional information. Diesel Particulate Filters (DPF) Diesel Oxidation Catalysts (DOC) Refer to this Operation and Maintenance Manual, “Severe Service Application” for information about operating an engine in a severe service application. Selective Catalytic Reduction (SCR) Lean NOx Traps (LNT) Note: Instructions for the installation of the filter are printed on the side of each Cat spin-on filter. For filters that are not Cat filters, refer to the installation instructions that are provided by the supplier of the filter.

Other systems may apply. Diesel Engine Oil Cat DEO (Diesel Engine Oil) Due to significant variations in the quality and in the performance of commercially available oils, Caterpillar makes the following recommendations: Cat DEO-ULS (Diesel Engine Oil Ultra Low Sulfur) (SAE 5W-40) Cat DEO-ULS (Diesel Engine Oil Ultra Low Sulfur) (SAE 10W-30) Cat DEO-ULS (Diesel Engine Oil Ultra Low Sulfur) (SAE 15W-40) Engine Oil Cat oils have been developed and tested in order to provide the full performance and life that has been designed and built into Cat engines. Cat DEO-ULS or oils that meet the Cat ECF-3 specification and the API CJ-4 are required for use in the applications listed below.

Cat DEO-ULS and oils meeting Cat ECF-3 specification and the API CJ-4 and ACEA E9 oil categories have been developed with limited sulfated ash, phosphorus, and sulfur. These chemical limits are designed to maintain the expected aftertreatment devices life, performance, and service interval. If oils meeting the Cat ECF-3 specification and the API CJ-4 specifications are not available, oils meeting ACEA E9 may be used. ACEA E9 oils meet the chemical limits designed to maintain aftertreatment device life. ACEA E9 oils are validated using some but not all ECF-3 and API CJ-4 standard engine performance tests.

Consult your oil supplier when considering use of an oil that is not Cat ECF-3 or API CJ-4 qualified. Failure to meet the listed requirements will damage aftertreatment-equipped engines and can negatively impact the performance of the aftertreatment devices. The Diesel Particulate Filter (DPF) will plug sooner and require more frequent DPF ash service intervals. Typical aftertreatment systems include the following: