Caterpillar — Caterpillar C15 and C18 Engine Operation and Maintenance Manual

SEBU8598 45 Maintenance Section Refill Capacities Maintenance Section The refill capacities for the engine crankcase reflect the approximate capacity of the crankcase or sump plus standard oil filters. Auxiliary oil filter systems will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. Refill Capacities i04133774 Refill Capacities Table 4 SMCS Code: 1000; 1348; 1395; 7560 Refer to this Operation and Maintenance Manual, “Fluid Recommendations” for information about the fluids which are acceptable for this engine. Note:

Refer to Special Publication, SEBU6251, “CaterpillarCommercial Diesel Engine Fluids Recommendations” for additional information. (1) These values are approximate capacities for the crankcase oil sump which include the standard oil filters that are installed at the factory. Engines with auxiliary oil filters will require additional oil. Refer to the OEM specifications for the capacity of the auxili- ary oil filter. Lubricant Refill Capacity Coolant Refill Capacity To maintain the cooling system, the total cooling system capacity must be known. The capacity of the total cooling system will vary. The capacity will depend on the size of the radiator (capacity).

Table 5 should be completed by the customer for the maintenance of the cooling system. Table 5 Illustration 37 g02300456 Standard pan (1) The total cooling system capacity includes the following compo- nents:the engine block, the radiator and all coolant hoses and lines. i05489209 Fluid Recommendations SMCS Code: 1280; 1348; 1395; 7560 Illustration 38 g02300473 Center pan NOTICE Every attempt is made to provide accurate, up-to-date information. By the use of this document, you agree that Caterpillar Inc. is not responsible for errors or omissions. NOTICE These recommendations are subject to change with- out prior notice.

Contact your Caterpillar dealer for the most up to date recommendations. Illustration 39 g02300474 Deep pan C15 and C18 Industrial Engines Approximate Refill Capacities Oil Sump(1) Engine with 1 Filter Engine with 2 Filters Standard pan 34 L (36 qt) 36 L (38 qt) Center pan 60 L (63 qt) 62 L (66 qt) Deep pan 68 L (72 qt) 70 L (74 qt) Approximate Capacity of the Cooling System Compartment or System Liters Quarts Total Cooling System (1)