SEBU8598 63 Maintenance Recommendations Belts - Inspect/Replace i04322187 Belts - Inspect/Replace (If Equipped) SMCS Code: 1397-040; 1397-510 The engine may be equipped with one of the following types of belts and belt tensioners. Single Belt The belt on the engine may look like the belt in Illustration 45 or like the belt in Illustration 45 . Illustration 46 g02294634 View of the front of a C15 or a C18 Industrial Engine (1) Belt (2) Belt tensioner For maximum engine performance and maximum utilization of your engine, inspect the belts for wear and for cracking. Replace the belts, if necessary. To replace the belt, perform the following steps: 1.
Insert a ratchet with a square drive into the square hole that is located in the tensioner for the belt. Rotate the tensioner clockwise in order to relieve tension on the belt. Remove the belt. Illustration 45 g02294633 View of the front of a C15 or a C18 Industrial Engine (1) Belt (2) Belt tensioner (3) Alternator (4) Idler pulley (5) Crankshaft pulley 2. Install the new belt correctly, as shown. Be sure that the belt is fully seated on the pulleys. The correct tension will automatically be applied when the ratchet is removed.