Kaiyi — Kaiyi Power Train System Technical Manual

4 Heat up bearing inner ring (approx. 120˚C). 7609ATM170 53 Mount bearing inner ring (1) until contact is obtained. 侍 Wear protective gloves. 1 侍 Adjust bearing inner ring after cooling- down. 7609ATM171 54 Mount stud bolt (1). 2 1 余 Tightening torque (M10/8.8 佴 16) : 1.73 kgf 余 m (12.5 lbf 余 ft ) Fit rectangular ring 40 佴 2.5 (2). 7609ATM172 侍 Check closing and opening of the clutch by means of compressed air at the hole (see arrow). Closing and opening of the clutch must be clearly audible. 7609ATM173 3-138