Kaiyi — Kaiyi Power Train System Technical Manual

55 1 Install sealing cap orifice (1). 侍 Wet contact surface with loctite (Type No. 262). 7609ATM174 (2) KR Clutch 刮 Heat up bearing inner ring (approx. 120˚C) 7609ATM175 刯 Mount bearing inner ring (1) until contact is obtained. 2 1 Fit rectangular ring 40 佴 2.5 (2). 侍 Wear protective gloves. 侍 Adjust bearing inner ring after cooling- down. 7609ATM176 Mount needle cage 60 佴 68 佴 20 (1) onto the shaft and oil it. 到 1 7609ATM177 3-139