Kaiyi — Kaiyi Power Train System Technical Manual

刱 3 Install ball bearing 50 佴 90 佴 18 (2) into the idler gear (1) until contact is obtained and fix it by means of retaining ring 90 佴 3 (3). 2 1 7609ATM178 Press in preassembled idler gear (1) onto the shaft until contact is obtained. 刲 1 7609ATM179 刳 Place both O-rings (1 and 2) into the piston grooves and oil them. 1 75 佴 3 2 142 佴 3 1 侍 Check function of the drain valve (see arrow) - There must be no jamming of the ball. 2 7609ATM180 刴 Place piston (1) into the disk carrier. 侍 Observe installation position, see figure. 1 7609ATM181 3-140