刵 Use a hand-operated press to place piston into the disk carrier by means of the assembly aid. Assembly aid 5870 345 088 7609ATM182 制 Mount inner installer (S) onto the disk carrier. 4 Install disk (1), compression spring (2), support shim (3) and L-ring (4). 3 2 侍 Installation position support shim and L-ring see figure TM185. 1 S Inner installer : see figure TM184 7609ATM183 刷 Preload compression spring by means of assembly aid (S1) and pressure piece (S2), until L-ring has engaged into the annular groove. S1 S2 Assembly aid (S1) 5870 345 088 Assembly fixture (S 倜 S2) 5870 345 124 (Inner installer and pressure piece) 侍 It is always necessary to mount a new L-ring.
7609ATM184 Disk carrier with piston retraction : 2 1 3 1 Washer 2 Compression spring 3 Support shim 4 L-ring 5 Disk carrier 6 Drain valve (piston) 7 Piston with O-rings 5 6 7 4 7609ATM185 3-141