刹 Mount inner installer (S) onto the disk carrier. 2 Install cup spring package (1) and L-ring (2). 1 侍 Installation position cup spring package and L-ring see figure TM281. S Inner installer see figure TM280 7609ATM279 刺 Preload cup spring package by means of assembly aid (S1) and pressure piece (S2), until L-ring has engaged into the annular groove. S1 S2 Assembly aid (S1) 5870 345 088 Assembly fixture (S 倜 S2) 5870 345 124 (Inner installer and pressure piece) 侍 It is always necessary to mount a new L-ring. 7609ATM280 Disk carrier with piston retraction :
2 1 1 Cup spring package 2 L-ring 3 Disk carrier 4 Piston with O-rings 3 4 7609ATM281 刻 Install outer and inner disks alternately into the disk carrier (4) as personated in figure TM282. 1 Friction disk -coated on one side (1 pcs) 2 Outer disks (6 pcs) 3 Inner disks (6 pcs) 2 3 侍 Take care that the uncoated (blank) side of the friction disk (1) is showing towards the piston. Number of friction surfaces : 12 4 1 7609ATM282 3-166