刼 Mount end plate (1) and fix disk package by means of snap ring (2) (e.g. thickness = 2.65 mm / recommended value). 1 2 7609ATM283 49 Press on end plate with F (approx. 100 N = 10 kg ) and set dial indicator to "zero". Magnetic stand 5870 200 055 Dial indicator 5870 200 057 F 7609ATM284 4: Then press end plate against the snap ring (upwards) and read disk clearance. F 侍 Disk clearance : 1.35~1.65 mm (see figure TM282) 侍 In case of deviations, the disk clearance must be corrected with an appropriate snap ring (optional thicknesses = 2.1~ 4.2 mm ). 7609ATM285 4; Heat up bearing inner ring (approx. 120˚C) 7609ATM286 3-167