Kaiyi — Kaiyi Power Train System Technical Manual

Insert the determined shim (e.g. s = 0.9 mm ) into the hole of the axle housing and adjust the bearing outer ring (see arrow) until contact is obtained. 7609AAX127 Cover some drive and coast flanks of the crown wheel with marking ink. Then insert the premounted differential into the axle drive housing. Load carrying device 5870 281 083 7609AAX128 Insert the determined shim (e.g. s = 1.1 mm ) into the hole of the axle housing and adjust the bearing outer ring (see arrow) until contact is obtained. 7609AAX129 Mount two locating pins and bring the axle housing into contact position with the axle drive housing by means of the lifting device.

Locating pins 5870 204 024 Then preliminarily fix the axle housing with 4 hexagon screws. 余 Tightening torque (M20/10.9) : 57.1 kgf 余 m (413 lbf 余 ft ) 7609AAX130 ц Preliminarily mount the axle housing without O-ring. 3-237