Kaiyi — Kaiyi Power Train System Technical Manual

Reassembly of shaft seal (figure Reassembly of shaft seal (figure AX134~136) AX134~136) Loosen the slotted nut and pull the input flange from the input pinion. Slotted nut wrench 5870 401 139 Clamping device 5870 240 002 7609AAX134 Mount the shaft seal with the seal lip showing to the oil chamber. Driver tool 5870 048 233 ц The exact installation position of the shaft seal is obtained when using the specified driver tool. ц Wet the outer diameter of the shaft seal with spirit directly before installation and fill the space between seal and dust lip with grease. 7609AAX135 Insert input flange and finally tighten by means of disk and slotted nut. 余 Tightening torque :

122 kgf 余 m (885 lbf 余 ft ) Slotted nut wrench 5870 401 139 Clamping device 5870 240 002 Cover the thread of the slotted nut with loctite (type no. : 262). ц 7609AAX136 3-239